Tag: Composites

Free Download 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 21, Issue 4 By
2000 | 692 Pages | ISBN: 0470294639 | PDF | 52 MB
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 Synthesis of Single Phase (Ba,Sr)TiO3, by a Reactive Process (pages 2-11): S. Bhaduri, W. A. Prisbrey, J. B. Jokisaari and S. B. BhaduriChapter 2 Fabrication of Ceramic/Epoxy Photonic Crystals by Stereolithgraphy (pages 13-17): Soshu Kirihara, Yoshinari Miyamoto and Kenji KajiyamaChapter 3 Unidirectionally Porous Oxides Prepared Using Eutectic Reactions (pages 19-24): Yoshikazu Suzuki, Toyoaki Yamada, Shunsaku Sakakibara and Tatsuki OhjiChapter 4 Plasma Jet Generation Over the Liquid Surface and Its Application to Diamond Synthesis (pages 25-30): Takeyuki Suzuki and Satoshi WadaChapter 5 Synthesis and Characterization of Fine?Grained 3Y?TZP/Hexaferrite in Situ Composites (pages 31-38): Yoshikazu Suzuki, Masanobu Awano, Naoki Kondo and Tatsuki OhjiChapter 6 Environment Conscious Ceramics (Ecoceramics) (pages 39-44): M. SinghChapter 7 Suspension of Sic Powders in Allylhydridopolycarbosilane (Ahpcs): Control of Rheology (pages 45-52): Frances I. HurwitzChapter 8 Biostructure Derived Ceramics (pages 53-60): H. Sieber, A. Kaindl and P. GreilChapter 9 Structural Ceramics Through Particle?Filled Preceramic Polymers: Supension and Particle Filtration Characterization (pages 61-66): M. Erdal, L. A. Ambrosoni and Z. GuoChapter 10 Texture Development in Reaction?Bonded Alumina (Rbao) Ceramics Via Templated Grain Growth (pages 71-78): Ender Suvaci and Gary L. MessingChapter 11 Oxidation and Transport Phenomena in the Reaction?Bonded Aluminum Oxide (Rbao) Process (pages 79-86): Ender Suvacr, George Simkovich and Gary L. MessingChapter 12 Two?Phase Materials in the Alumina?Yttria System Produced by Mechanical Alloying (pages 87-94): J. Alkebro, R. Warren, S. Begin?Colin and A. MocellinChapter 13 Spark Plasma Sintering of Mullite?Zirconia?TiO2 Ceramics (pages 95-102): E. Rocha?Rangel, H. Balmori?Ramirez, S. D. De La Torre, H. Miyamoto, M. Umemoto and K. TsuchiyaChapter 14 Fabrication of Channel Structures in Ceramics That Were Sintered and Joined by Microwave Heating (pages 103-110): Jong?Gi Lee, E. D. Case, H. W. Shin and P. KwonChapter 15 Solid Freeform Fabrication and Design (pages 111-119): Susanna Ventura, Subhash Narang, Fred F. Lange, Elaine Cohen, Douglas Twait and Pramod KhandelwalChapter 16 Extrusion Freeform Fabrication of Functional Ceramic Prototypes (pages 121-128): R. Vaidyanathan, J. L. Lombardi, J. Walish, S. Kasichainula, P. Calvert and K. CooperChapter 17 Light Weight Ceramic Composites from Laminated Paper Structures (pages 129-134): H. Sieber, H. Friedrich, J. Zeschky and P. GreilChapter 18 Solid Freeform Fabrication of Advanced Ceramics (pages 135-142): Charles Gasdaska, Vikram Jamalabad, Doug Twait, Milt Ortiz and Boris MitlinChapter 19 Solid Freeform Fabrication of a Telescoping Actuator Via Laminated Object Manufacturing (pages 143-150): Barry A. Bender, Roy J. Rayne and Carl CM. WuChapter 20 Solid Freeform Fabrication of Intermetallics and Their Ceramic Composites by Reactive Rapid Prototyping (pages 151-158): Kiyotaka Matsuura, Masayuki Kudoh, Soshu Kirihara and Yoshinari MiyamotoChapter 21 Design Tools for Multi?Material Layered Manufacturing System (pages 159-166): Noshir A. Langrana, Dan Qiu, Stephen C. Danforth, Ahmad Safari, Wenbiao Han and Mohsen A. JafariChapter 22 The Influence of Substrate Microstructure on the Crack Formation of CrN Coatings on Brass. (pages 167-175): Saki Krishnamurthy and Ivar E. ReimanisChapter 23 Environmentally Benign Ceramic Composite Coatings with Advanced Tribological Properties (pages 177-184): D. F. Scherer, R. Gadow and A. KillingerChapter 24 Reactive Coating of SiC on Diamond Particles (pages 185-192): Y. Miyamoto, J. Lin, H. Moriguchi, A. Ikegaya, Y. Yamashita, T. Kashiwagi and O. YamaguchiChapter 25 Determination of Strength of Double?Layer Brittle Coatings on Metallic Substrates by Four?Point Bend Test (pages 193-202): O. Unal and D. J. SordeletChapter 26 Monazite and Scheelite Deformation Mechanisms (pages 203-217): R. S. HayChapter 27 Porous Rare?Earth Aluminate Fiber Coatings for Oxide?Oxide Composites (pages 219-228): Michael K. Cinibulk, Triplicane A. Parthasarathy, Kristin A. Keller and Tai?Ii MahChapter 28 Monazite Coatings on Nextel 720™, 610™, and Tyranno?Sa Fiber Tows; Effects of Precursors on Fiber Strength (pages 229-236): E. E. Boakye, M. D. Petry, R. S. Hay and L. M. DouglasChapter 29 Mg?Si?Al?O Coatings on Hi?Nicalon SiC Fiber by Alkoxide Method (pages 237-242): Naoki Igawa, Tomitsugu Taguchi, Reiji Yamada and Shiro JitsukawaChapter 30 Effects of Mullite/ Ysz Coatings on the Performance of Sic/ Sic Composite Combustion Liners (pages 243-250): L. C. Russell, J. Sankar, R. A. Miller, D. Zhu and A. CalominoChapter 31 Surface Characterization of Plasma Sprayed Hydroxyapatite Coatings (pages 251-258): Limin Sun, Christopher C. Berndt, A. Kucuk, R. S. Lima and K. A. KhorChapter 32 Effect of Multiple Coating Interfacial Structures on Bending Property of Fcvi SiC/SiC Composites (pages 259-266): Wen Yang, Hiroshi Araki, J. Y. Park, Tetsuji Noda, Akira Kohyama and Jinnan YuChapter 33 BN and SiBN Fiber Coatings Via Cvd Using a Single Source, Liquid Precursor Based on Borazine (pages 267-274): Frances I. Hurwitz, Donald R. Wheeler, Terry R. Mccue, Y. L. Chen, Paul V. Chayka and Chongying XuChapter 34 Silicon Carbide Fibers with Boron Nitride Coatings (pages 275-281): Michael D. Sacks and John J. BrennanChapter 35 Optimization of New Precursor Systems for Continuous Fluid Carbon Fiber Coating (pages 283-290): Natasa Doslik, Ralph Fischer and Rainer GadowChapter 36 Fabrication and Mechanical Properties of Si?M?C?(O) Tyranno Fibers (pages 291-298): K. Kumagawa, H. Yamaoka, M. Shibuya, M. Suzuki and T. YamamuraChapter 37 Prototype Reactor for Scale?Up of Si?N?O Fiber Production (pages 299-306): A. Vital, U. Vogt, T. Graule, W. Graehlert, M. Leparoux, V. Hopfe, H. C. Ewing, R. Daum and A. BeilChapter 38 Special Modified Silazanes for Coatings, Fibers and CMC’S (pages 307-314): G. Motz, J. Hacker and G. ZieglerChapter 39 Cvd Process for Si?N?O Fiber Growth Controlled by In?Situ Ftir Spectroscopic Monitoring (pages 315-322): U. Vogt, A. Vital, T. Graule, W. Graehlert, M. Leparoux, V. Hopfe, H. C. Ewing, R. Daum and A. BeilChapter 40 High Heat?Resistant SiC?Polycrystalline Fiber and Its Fiber?Bonded Ceramic (pages 323-330): Toshihim Ishikawa, Shinji Kajii and Terumi HisayukiChapter 41 Creep Behavior of Polymer?Derived SiC?Based Fibers (pages 331-338): Michael D. Sacks and Greg A. StaabChapter 42 Chemical and Thermo?Mechanical Properties of SiC?Based Reinforcements (pages 339-345): G. Chollon and R. NaslainChapter 43 Thermostructural Behavior of Sic Fiber Fabrics and Implications for Cmc (pages 347-362): H. M. Yun and J. A. DicarloChapter 44 Nextel™ 650 Ceramic Oxide Fiber: New Alumina?Based Fiber for High Temperature Composite Reinforcement (pages 363-373): D. M. Wilson and L. R. VisserChapter 45 Synthesis and Characterisation of TiB2 Whiskers (pages 375-382): Mats Carlsson and Mats JohnssonChapter 46 Environmental Effects on Crack Propagation of Alumina Ceramics (pages 384-396): M. E. Ebrahimi, J. Chevalier and G. FantozziChapter 47 Strengths and Deformation of Single Crystal Oxides at Ambient and Elevated Temperatures for Refractive Solar Concentrator Applications (pages 397-405): Sung R. Choi, Dongming Zhu and Robert A. MillerChapter 48 Electrokinetic Aspect of Friction and Wear of Oxide Ceramics (pages 407-414): Sasa Novak and Jozef VizintinChapter 49 Conformation of Honey?Rod (pages 415-421): Rodriguez C. Martin, Rocha R. Enrique and Roberto T. HernandezChapter 50 Transparent MgAl2O4 Spinel – Revisited (pages 423-430): Mark C. L. Patterson, Jenni E. Caiazza, Don W. Roy and Gary GildeChapter 51 Processing of Bone Ash Based Dental Implant Material with Zirconia Addition (pages 431-437): Recep Artir, Yilmaz Karakas and Cuma BindalChapter 52 The Effects of Waste Loading on the Durability of Nuclear Waste Glasses (pages 439-445): Greg Darby, David E. Clark and George G. WicksChapter 53 Glass?Ceramics in the System Ca5[PO4]3F – CaAl2Si2O8 ?CaMgSi2O6 (pages 447-454): Dilshat Tulyaganov and Cinvestav SaltilloChapter 54 Martensitic Transformation of Y4Al2O9 (pages 455-460): M. Shimada, H. Yamane and B. A. HunterChapter 55 Microstructure Control of Alumina Ceramics (pages 461-468): Satoshi Iio, Hiroshi Yamamoto and Takeshi MitsuokaChapter 56 On the Mechanism of MoSiz Pesting in the Temperature Range 400-500°C. (pages 469-476): K. Hansson, M. Halvarsson, J. E. Tang, J. E. Svensson, M. Sundherg and R. PoinpeChapter 57 An Investigation of the Microstructure in the Pest Oxide of a MoSi2? Based Composite (pages 477-484): Jun Eu Tang, Mats Halvarsson, Anders Kvist, Kristina Hansson, Jan?Erik Svensson and Robert PompeChapter 58 Gelcast AS800 Materials Characterization for Rocket Engine Applications (pages 485-496): Simin Rachel KhoshbinChapter 59 Intermediate Temperature Inert Strength and Dynamic Fatigue of Candidate Silicon Nitrides for Diesel Exhaust Valves (pages 497-508): A. A. Wereszczak, T. P. Kirkland, H.?T. Lin and S. K. LeeChapter 60 Superplastically Sinter?Forged Silicon Nitride (pages 509-514): Naoki Kondo, Yoshikazu Suzuki and Tatsuki OhjiChapter 61 Creep Resistant Silicon Nitride Ceramics – Approaches of Microstructural Design (pages 515-526): A. Rendtel and H. HubnerChapter 62 Testing and Finite Element Analysis of Sintered Silicon Nitride Specimens Under Four?Point Bending (pages 527-536): J. Lua, J. Sankar, S. Yarmolenko, W. Windley, D. Pai and L. C. RussellChapter 63 Effect of Heat?Treatment on Creep Behavior of a Self?Reinforced Silicon Nitride (Si3N4) (pages 537-544): Q. Wei, J. Sankar and J. NarayanChapter 64 Material Design to Improve Wear Resistance of Silicon Nitride with Cvd Coatings (pages 545-552): P. K. MehrotraChapter 65 Environmental Effects on the Mechanical Properties of SiC?Based Hot Gas Cleaning Filters (pages 553-560): P. H. Pastila, A.?P. Nikkila and T. A. MantylaChapter 66 Corrosion of Ceramic Filters for Hot Cleaning in Thermal Power Plants (pages 561-568): Laura Montanaro, Alfredo Negro, Olivier Frantz, Paul Billard and Rouzbeh RezakhanlouChapter 67 Tribochemical Wear of Boron Carbide in Sliding Contacts (pages 569-574): P. Larsson and N. AxenChapter 68 Preceramic?Modified Reaction?Bonded Silicon Nitride (PM?RBSN): Processing and Properties with Focus on Long?Term High?Temperature Stability (pages 575-582): Gerhard Wotting, Lothar Schonfelder and Andreas HerzogChapter 69 Shaping Srbsn Parts by a Closed?Mold Casting Method (pages 583-588): Gary M. Crosbie and G. T. BretzChapter 70 Joining of Non?Oxide Ceramics Using Conventional and Microwave Heating (pages 589-597): Jong?Gi Lee and E. D. CaseChapter 71 Microwave Sntering at High Temperature (pages 599-606): H. E. Huey, Q. S. Wang, M. S. Morrow and D. E. SchechterChapter 72 Processtng and Mechanical Properties of Silicon Nitride Formed by Robocasting Aqueous Slurries (pages 607-614): Guoping He, Deidre A. Hirschfeld and Joseph CesaranoChapter 73 Influence of Boron and Carbon on the Oxidation of Smtered Silicon Carbide at 1500°C (pages 615-622): C. Schumacher and K. G. NickelChapter 74 Thermophysical and Thermomechanical Properties of Thermal Barrier Coating Systems (pages 623-633): Dongming Zhu and Robert A. MillerChapter 75 Thermal Fatigue Testing of Layer?Graded Thick Thermal Barrier Coating Systems (pages 635-643): Robert A. Miller, Dongming Zhu, John G. Goedjen, Anthony M. Calomino and Thomas A. CruseChapter 76 Microstructure, Mechanical and Thermal Properties of Unidirectionally Alligned Silicon Nitride (pages 645-652): Soo W. Lee, Sang Yang Lee, Yong Ho Choa, Koichi Niihara, Dong?Soo Park and Bernard J. HockeyChapter 77 Deformation and Strength Behavior of Plasma?Sprayed ZrO2?8wt% Y2O3 Thermal Barrier Coatings in Biaxial Flexure and Trans? Thickness Tension (pages 653-661): Sung R. Choi, Dongming Zhu and Robert A. MillerChapter 78 Residual Stress Charaterization of Thermal Barrier Coatings – Comparison of Thermally Sprayed, EB?PVD and CVD Based Coatings (pages 663-670): Michael Buchmann, Christian Friedrich and Rainer GadowChapter 79 Rapid, Cost?Effective Silicon Carbide Optical Component Manufacturing Technique (pages 671-679): John Casstevens, Matt Ferber and Ralph DinwiddieChapter 80 Deformation Characteristics of Plasma Sprayed Thermal Barrier Coatings (pages 681-689): A. Kucuka, C. C. Berndt, U. Senturk, R. S. Lima and C. R. C. LimaChapter 81 Improvement of High Temperature Corrosion Resistance of Carbon by Ceramic Oxides Coats (pages 691-698): N. Bahlawane and T. Watanabe

Free Download 23rd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 20 Issue 4 By
1999 | 590 Pages | ISBN: 0470294574 | PDF | 47 MB
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 Characterization of In?Situ BN Interface Formed by Nitridation of Nextel 312 (pages 3-10): Frances I. Hurwitz, John Riehl, John Madsen, Terry R. Mccue and Darwin L. BoydChapter 2 Simulation of Progressive Damage for High Temperature Woven Composites (pages 11-22): Jacob Fish, Qing Yu and Durell WildmanChapter 3 Surface Finish and Composition Dependence of Valvetrain Friction with Silicon Nitride Tappet Inserts (pages 25-32): G. M. Crosbie, R. L. Allor, A. Gangopadhyay, D. Mcwatt and P. WillermetChapter 4 Functionally Graded Materials for Gun Barrels (pages 33-38): P. J. Huang, C. Hubbard, J. J. Swab, M. W. Cole, S. Sampath, S. Depalo, J. Gutleber, A. Kulkarni and J. MargoliesChapter 5 Development of a CMC Thrust Chamber (pages 39-46): T. Nakamura, H. Murata, N. Matuda, F. Tomioka, S. Nishide and S. MasakiChapter 6 Design and Characterisation of a Co?Extruder (pages 47-54): Z. Liang and S. BlackburnChapter 7 Scale?Up of APCVD Uniform Ceramic Coating of Tubular Inner Surfaces via Process Modeling (pages 55-60): Terence J. ClarkChapter 8 Joining Techniques for Fiber?Reinforced Ceramic Matrix Composites (pages 61-70): A. S. Fareed, C. C. Cropper and B. R. RossingChapter 9 Microwave Joining of Al2O3 ?ZrO2 Composites (pages 71-78): S. Aravindan and R. KrishnamurthyChapter 10 Transparent Armor Ceramics: Alon and Spinel (pages 79-84): Jeffrey J. Swab, Jerry C. Lasalvia, Gary A. Gilde, Parimal J. Patel and Matthew J. MotykaChapter 11 Modeling the Oxidation Kinetics of Continuous Carbon Fibers in a Ceramic Matrix (pages 87-94): Michael C. Halbig and James D. CawleyChapter 12 Mechanisms of Low Temperature Environmental Effects on Transformation?Toughened Zirconia Ceramics (pages 95-103): Zhenbo Zhao and Derek O. NorthwoodChapter 13 Oxidative Pest Degradation of Hi?Nicalon/BN/SiC Composite as a Function of Temperature and Time in the Burner Rig (pages 105-114): Linus U. J. T. OgbujiChapter 14 Interphase Oxidation in SiC/SiC Composites at Varying Partial Pressures of Oxygen (pages 115-122): L. A. Giannuzzi and C. A. LewinsohnChapter 15 Effects of Particulate Debris Morphology on the Rolling Wear Behavior of All?Steel and Si3N4?Steel Bearing Element Couples (pages 123-132): David J. Mitchell, John J. Mecholsky and James H. AdairChapter 16 A Comparative Study of the Tensile, Fatigue, and Creep Properties of Sintered (SNW?1000 & GS?44) and Hiped (PY?6) Silicon Nitride Ceramics (pages 133-144): Jag Sankar, Gautam Choudhury, Quiming Wei, Varun Vijayrao and Ajit D. KelkarChapter 17 Modeling Ceramic Composite Hot Gas Candle Filter Material Using Energy Method (pages 145-152): X. Huang, R. H. Carter and K. L. ReifsniderChapter 18 Experimental Study of a Ceramic Hot Gas Candle Filter Material (pages 153-160): R. H. Carter, X. Huang and K. L. ReifsniderChapter 19 Environmental Effects of Microstructural Stability in SiC/SiC Composites (pages 161-168): Tamaki Shibayama, Guo Wei He, Heishichiro Takahashi, Yutai Katoh and Akira KohyamaChapter 20 Strength of Masonry Mortars Under Field Exposure Conditions (pages 169-173): O. Z. CebeciChapter 21 Research Programs on Material Processing in High Magnetic Fields at Tsukuba Magnet Laboratory (pages 179-190): Hitoshi Wada, Akira Fukuzawa, Hideyuki Ohtsuka, Takeshi Ohara, Haruo Abe and Tsukasa KiyoshiChapter 22 Powder Consolidation using Dynamic Magnetic Compaction (DMC) Process (pages 191-198): Bhanu ChelluriChapter 23 Microwave Induced Combustion Synthesis of Ultrafine Barium Hexaferrite Powders (pages 199-206): S. Bhaduri, S. B. Bhaduri and J. B. ZanottiChapter 24 A Comparison of Annealing Treatments of an Oxide Ceramica (pages 207-212): M. S. Morrow, D. E. Schechter, R. Simandl, H. E. Huey and Q. S. WangChapter 25 Synthesis of Crystalline Materials with High Quality Under Short?Time Microgravity (pages 215-226): Takeshi Okutani, Hideki Minagawa, Hideaki Nagai, Yoshinori Nakata, Masaaki Suzuki, Yoshiho Ito, Takashi Tsurue and Kazuyuki IkezawaChapter 26 Auto Ignition Synthesis and Microwave Sintering of ZrO2?CaO (pages 227-234): S. B. Bhaduri, S. Bhaduri and J.?G. HuangChapter 27 Reactive Synthesis of Dense Fgms in the Ti?B Binary System (pages 235-242): S. Bhaduri and S. B. BhaduriChapter 28 Flight? and Ground?Based Materials Science Programs at NASA (pages 243-250): Donald C. GilliesChapter 29 Zero Gravity Sol?Gel Glass?Metal Composite Production (pages 251-256): Michelle Korwin, Kristin Lynch and William LacourseChapter 30 Thermal Shock Behavior of Single Crystal Oxide Refractive Concentrators for High Temperature Solar Thermal Propulsion (pages 259-266): Dongming Zhu, Sung R. Choi, Nathan S. Jacobson and Robert A. MillerChapter 31 Inviscid Melt Spinning of Mullite Fibers (pages 267-273): Brian S. MitchellChapter 32 Growth and Diameter Control of Al2O3/Y3Al5O12, Euteciic Fiber by Micro?Pullingdown Method and its High Temperature Strngth and Thermal Stability (pages 275-282): A. Yoshikawa, K. Hasegawa, T. Fukuda, K. Suzuki and Y. WakuChapter 33 Development of SiC?Based Layered Composites with Rare?Earth Silicate Layers (pages 283-290): Takayuki Fukasawa, Masahiro Kato, Yasuhiro Goto, Shoko Suyama and Tsuneji KamedaChapter 34 Lanthane Aluminate Thermal Barrier Coating (pages 291-297): G. W. Schafer and R. GadowChapter 35 Recent Advancement of Tyranno/SiC Composites R&D (pages 301-308): T. Nakayasu, M. Sato, T. Yamamura, K. Okamura, Y. Katoh and A. KohyamaChapter 36 Fabrication of High Performance SiC/SiC Composite by Polymer Impregnation and Pyrolysis Method (pages 309-316): Masaki Kotani, Akira Kohyama, Kiyohito Okamura and Takahiro InoueChapter 37 Highly Cross?Linked Precursors to Silicon Carbide (pages 317-322): Takashi Iseki, Masaki Narisawa, Kiyohito Okamura, Kunio Oka and Takaaki DohmaruChapter 38 Microstructural Stability of SiC/SiC Composites Under Dual?Beam Ion Irradiation (pages 325-332): Yutai Katoh, Tatsuya Hinoki, Akira Kohyama, Tamaki Shibayama and Heishichiro TakahashChapter 39 High Energy Plasma Ceramic Coating Optimization (pages 335-345): Michael Quint and Howard KopechChapter 40 Design of a Laser CVD Rapid Prototyping System (pages 347-354): Chad E. Duty, Daniel L. Jean and W. Jack LackeyChapter 41 Corrosion?Resistant CVD Mullite Coatings for Si3N4 (pages 355-362): J. A. Haynes, K. M. Cooley, D. P. Stinton, R. A. Lowden and W. Y. LeeChapter 42 High Temperatuer Corrosion of Oxide?Coated SiC in Water Vapor Atmosphere (pages 363-370): Nobuhiko Yunoki, Satoshi Kitaoka and Hiroshi KawamotoChapter 43 Bending Properties of CVI SiCf/SiC Composites at Elevated Temperatures (pages 371-378): Hiroshi Araki, Wen Yang, Ying Shi, Shinji Sato, Tetsuji Noda and Akira KohyamaChapter 44 Stress?Rupture of New Tyranno Si?C?O?Zr Fiber Reinforced Minicomposites (pages 379-386): Gregory N. MorscherChapter 45 Thermal Stabilities of CVI SiCf/SiC Composites (pages 387-394): Tetsuji Noda, Hiroshi Araki, Wen Yang and Akira KohyamaChapter 46 Thermal Expansion Characteristics of Coated Fiber Composites (pages 395-402): Rajeev Krishnan, Ajit D. Kelkar and J. SankarChapter 47 The Effect of Heat Treatment on Thermal and Strength Properties of SiC Fiber Prepared from Activated Carbon Fiber (pages 403-410): J. Shimizu, K. Okada, T. Watabe and K. NakajimaChapter 48 Optimization and Scale?Up of Si?N?O Fiber Synthesis (pages 411-418): A. Vital, H. C. Ewing, U. Vogt and L. RehChapter 49 The Properties of Ceramic Laminates (pages 421-426): W. J. Clegg, G. Andrees, E. Carlstrom, R. Lundberg, A. Kristoffersson, R. Meistring, E. Menessierg and A. SchoberthChapter 50 Shock Compaction of the Titanium?Silicon Ternary Carbide (Ti3SiC2) Powders (pages 427-434): Jennifer L. Jordan and Naresh N. ThadhaniChapter 51 Submicrometer Cutting Tools on the Basis of Al2O3 for Machining Alloyed Hard Cast Iron and Hardened Steel (pages 435-442): Andreas Krell, Paul Blank, Lutz?Michael Berger and Volkmar RichterChapter 52 High Temperature Properties and Creep Resistance of Near?Stoichiometric SiC Fibers (pages 443-450): H. Serizawa, C. A. Lewinsohn, G. E. Youngblood, R. H. Jones, D. E. Johnston and A. KohvamaChapter 53 Creep Response of Fiber Reinforced Ceramic Composites (pages 451-458): U. Anandakumar and Raj N. SinghChapter 54 The Multiaxial Strength of Tungsten Carbide (pages 459-466): Jonathan Salem and Michael AdamsChapter 55 Hot Pressing of Mixtures of Aluminnzirconia Powders (pages 467-474): Karl Jakus, Kabir Bhatia and John E. RitterChapter 56 Gas Pressure Sintering Silicon Nitride Ceramics Using Rare Earth and Transition Metal as Sintering Aids (pages 475-480): A. J. N. Dias, J. Duailibi Fh, C. A. Vilardo, T. C. Silva and M. C. S. NobregaChapter 57 Program Overview: Reduced Cost, Improved F.O.D. Resistance and Improved Attachments for Insertion of Silicon Nitride Turbomachinery Components (pages 485-496): A. C. JonesChapter 58 Advanced Silicon Nitride Components: A Cost Analysis (pages 497-504): Julie M. Schoenung, Edwin H. Kraft and Daniel AshkinChapter 59 Surface Compressive Coatings for Improved F.O.D. Resistant Silicon Nitride (pages 505-511): Daniel Ashkin, Jack A. Rubin, Dinesh K. Shetty and Jun XiChapter 60 Copper/Gallium Amalgam – A Material for Joining Ceramics and Metals (pages 513-521): M. Heim, J. E. Holowczak, L. A. B. Tessarotto and V. A. GreenhutChapter 61 Design, Analysis and Testing of Ceramic Components for an Advanced Military Expendable Turbojet Engine (pages 523-532): A. C. JonesChapter 62 Oil?Less Silicon Nitride Bearings for an Advanced Military Expendable Turbojet Engine (pages 533-540): George W. Hosang, Daniel Ashkin and Dinesh K. ShettyChapter 63 CMC Combustor with a Thick Thermal Protection System ?A Detailed Stress Analysis (pages 543-550): J. Shi and P. D. AndrewChapter 64 Manufacturing and CMC?Component Development for Brake Disks in Automotive Applications (pages 551-558): Rainer Gadow and Marcus SpeicherChapter 65 A Model of Toughening in Metal Melt?Infiltrated Ceramic Composites (pages 559-567): William B. HilligChapter 66 Fluid Coating Process for Protective Coatings of Carbon Fibers (pages 571-577): R. Gadow, S. Kneip and G. W. SchaferChapter 67 Diamond Films on the Leading Edge (pages 579-586): M. I. MendelsonChapter 68 Co?Extrusion of Solid Oxide Fuel Cell Functional Elements (pages 587-594): Z. Liang and S. BlackbumChapter 69 Manufacturing of Aluminum Nitride Heat Exchangers by Ceramic Injection Molding (pages 595-602): R. Fischer, R. Gadow and G. W. Schafer

Free Download 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 19, Issue 4 By
1998 | 559 Pages | ISBN: 0470294493 | PDF | 47 MB
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 The Effect of High Temperature Soaking on the Microstructure and Properties of a Sintered Silicon Nitride (pages 3-10): Q. Wei, J. Sankar, V. Vijayrao and J. NarayanChapter 2 Environmentally Induced Time?Dependent Failure Mechanisms in Cfccs at Elevated Temperatures (pages 11-18): C. A. Lewinsohn, C. H. Henager and R. H. JonesChapter 3 High Temperature Oxidation and Corrosion of a Porous Si2N2O?ZrO2 Composite Material (pages 19-27): Maiken Heim, Jiaxin Chen, Colette O’Meara, Refael Gatt and Robert PompeChapter 4 Low Damage, High Productivity Abrasive Grinding of Ceramics (pages 28-36): Robert Sabia, Victor A. Greenhut, Dale E. Niesz, Ping Tang, Ruilin Zeng and Ioan MarinescuChapter 5 Effect of Crystallization on Creep of Clay Bonded Sicfilters (pages 37-44): Pirjo H. Pastila, Vesa Helanti, Antti?Pekka Nikkila and Tapio A. MantylaChapter 6 Wear Performance of Monolithic and Composite Mixing Tubes for Abrasive Water Jet Cutting of Ceramics (pages 45-54): M. Ramulu, M. G. Jenkins, T. L. Stevens and J. A. SalemChapter 7 Reliability Modeling of Brittle Anisotropic Materials (pages 56-64): Jonathan Salem, Ronald Noebe and Jane ManderscheidChapter 8 A Strain?Based Methodology for High Temperature Lifetime Prediction (pages 65-78): S. M. Wiederhorn, W. E. Luecke and R. F. KrauseChapter 9 Investigations of the Weibull Modulus as a Function of Stressing Rate (pages 79-87): M. J. Andrews, A. A. Wereszczak, K. Breder, M. K. Ferber and T. P. KirklandChapter 10 Exploration of the Weibull Modulus as a Function of Surface Preparation and Flexure Testing Conditions (pages 89-97): Kristin Breder, Andrew A. Wereszczak and Mark J. AndrewsChapter 11 Lifetime Prediction for Ceramic Components Subjected to Time?Dependent Loading (pages 99-106): Angelika Bruckner?Foit and Christian ZieglerChapter 12 Prediction of the Load?Bearing Capabilities Based on the First Matrix?Cracking Criterion for Plainweave Multilayered Nicalon/SiC Composites with lay?Ups of [0/20/60] and [0/40/60] (pages 107-116): Wei Zhao, Peter K. Liaw and Niann?I YuChapter 13 Life Prediction Tool for Ceramic Matrix Composites at Elevated Temperatures (pages 117-124): Scott Case, Nirmal Iyengar and Ken ReifsniderChapter 14 Experimental Study and Modeling of a Novel Ceramic Composite Hot Gas Candle Filter Material (pages 125-132): Xinyu Huang, Rob Carter and Ken L. ReifsniderChapter 15 Bridging Behavior at Creep Regime (pages 134-142): S. B. BinerChapter 16 Oxygen Diffusion and Reaction Kinetics in Continuous Fiber Ceramic Matrix Composites (pages 143-150): Michael C. Halbig, Andrew J. Eckel and James D. CawleyChapter 17 Prediction of Tension Failure of Textile Composite Using Micro?Mechanics and Statistical Analysis (pages 151-158): Y. Shi, M. F. Card, V. V. Raman and R. M. V. MurthiChapter 18 The Effects of Load, Grain Size, and Grain Boundaries on the Hardness of Alumina (pages 159-168): Andreas KrellChapter 19 Computational Analysis of Residual Stress in Ceramics Having Heterogeneous Microstructure (pages 169-176): Yoshihisa Sakaida, Akira Okada, Keisuke Tanaka, Yoshiyuki Yasutomi and Hiroshi KawamotoChapter 20 Finite Element Modeling of Thermal Residual Stress in Tungsten/Tungsten?Carbide Composites (pages 177-184): Kai Wang and Robert R. ReeberChapter 21 Finite Element Analysis of the Stress Distribution in Silicon Nitride Bearing Balls (pages 185-192): Y. L. Tsai, J. J. Mecholsky and H. A. ChinChapter 22 Finite Element Analysis of Crack Wake Tractions in Chevron?Notched Bend Bar (pages 193-201): G. Reza Sarrafi?Nour, Theo Fett and Thomas W. CoyleChapter 23 Analysis of the Bridging Zone Contribution to the R?Curve Behavior of Sic?Platelet?Reinforced Alumina Using the Chevron?Notched Bend Bar Specimen (pages 203-211): G. Reza Sarrafi?Nour and Thomas W. CoyleChapter 24 Fabrication of NZP Ceramic?Metal Composite Diesel Engine Exhaust Port Liners Using Finite Element Analysis as a Guiding Tool (pages 214-223): R. Nageswaran, J. J. Cassell, S. Y. Limaye and D. StintonChapter 25 Finite Element Modelling and Analysis of a Ceramic Matrix Composite Combustor (pages 225-232): J. Shi and P. D. AndrewChapter 26 Joint Integrity Issues in a Novel Piezoceramic Actuator Design (pages 233-240): T. L. Jessen, R. J. Rayne, B. A. Bender, L. D. Flippen and C. KimChapter 27 Manufacturing of Ceramic Matrix Composite Rotor for Advanced Gas?Generator (pages 241-248): Takahito Araki, Nobuyuki Suzumura, Shoju Masaki, Tadashi Natsumura, Masakazu Onozuka, Hisaichi Ohnabe and Koichi YasuhiraChapter 28 Design and Analysis of a CMC Turbine Blade Tip Seal for a Land?Based Power Turbine (pages 249-256): J. A. Momson and K. M. KauthChapter 29 Degradation of SiC/BN/SiC Composite in the Burner Rig (pages 257-264): Linus U. OgbujiChapter 30 Rudimentary CFCMC Design and Mechanical Behavior Prediction (pages 265-272): T. L. Jessen and A. KeeChapter 31 Alumina Single?Crystal Fibre Reinforced Alumina Matrix for Combustor Tiles (pages 273-280): O. Sudre, A. G. Razzell, L. Molliex and M. HolmquistChapter 32 Strength Measurement of Thick Brittle Coatings on Metals (pages 282-291): O. Unal, D. J. Sordelet, D. J. Barnard and M. AkincChapter 33 High?Temperature Slow Crack Growth, Fracture Toughness and Room?Temperature Deformation Behavior of Plasma?Sprayed ZrO2?8 WT % Y2O3 (pages 293-301): Sung R. Choi, Dongming Zhu and Robert A. MillerChapter 34 Dust Erosion Testing of Coated Aetb Tile for Aerospace Applications (pages 303-310): Edmund H. Moore and Richard A. SmithChapter 35 Thermomechanical Behavior of Plasma?Sprayed Zirconia Thermal Barrier Coatings (pages 312-321): J. P. Singh, M. Sutaria and A. ChopraChapter 36 Damage Behavior and Residual Fatigue Bending Strength of Impact?Induced CFRP Composites (pages 323-328): Kwang?Hee Im and In?Young YangChapter 37 Ultrasonic Nondestructive Evaluation of Carbon/Cafwon Brake Disks (pages 329-334): Kwang?Hee Im, David K. Hsu and Hyunjo JeongChapter 38 In Sztu Observation of Stable Crack Propagation in Senb Specimens for R?Curve Evaluation (pages 335-340): Kyoji Hiramatsu, Akira Okada and Hatsuhiko UsamiChapter 39 Irradiation Creep of Advanced Sic?Based Fibers (pages 341-346): G. E. Youngblood, R. H. Jones, G. N. Morscher, R. Scholz and A. KohyamaChapter 40 Active Metal Brazing of Si3N4 to Metals (pages 347-354): Maiken Heim, Luiz A. B. Tessarotto and Victor A. GreenhutChapter 41 Uniformity in Microwave Processed Al2O3?ZrO2 Composite Bars (pages 355-360): Greg Darby and David E. ClarkChapter 42 Evolution of Phases in MoSi2?TiB2 Composites Produced by Displacement Reactions (pages 361-366): L. A. Dempere and M. J. KaufmanChapter 43 Effects of Silicon Carbide Structure on the Microwave Properties of Silicon Carbide/Alumina Cement Susceptors (pages 367-372): K. S. Leiser and D. E. ClarkChapter 44 Foreword (page 375): Kathryn V. Logan, Zuhair A. Munil and Richard M. SprigsChapter 45 Processing, Deformation, and Fracture of Ni?Al2O3 Composites with and Without Graded Microstructures (pages 378-386): Andrew N. Winter, Brian A. Corff, Ivar E. Reimanis and Barry H. RabinChapter 46 Functionally Graded Boron Carbide (pages 387-393): J. J. Petrovic, K. J. McClellan, C. D. Kise, R. C. Hoover and W. K. ScarboroughChapter 47 High Temperature Plasticity in the ZrO2?Y2O3 System (pages 395-406): Arturo Dominguez?Rodriguez, Diego Gomez?Garcia and Manuel Jimenez?MelendoChapter 48 Dynamic Compression Behavior of a Hot Pressed TiB2?Al2O3 Ceramic Composite from SHS?Powders (pages 407-414): Jean?Marcel JametChapter 49 Synthesis of Tic – Al2O3 Composites Using Microwave?Induced Self?Propagating High Temperature Synthesis (SHS) (pages 415-421): Duangduen Atong and D. E. ClarkChapter 50 Mechanical Properties of Melt?Derived Erbium Oxide (pages 423-429): A. D. Neuman, M. J. Blacic, M. Platero, R. S. Romero, K. J. Mcclellan and J. J. PetrovicChapter 51 Amorphous and Nanocrystalline Diamond Synthesized by Scarq: Shock Compression and Rapid Quenching (pages 432-444): Ken?Ichi Kondo, Hisako Hirai and Masatake YoshidaChapter 52 Effect of Al2O3 Phase Transformations on Gram Growth in ZrO2?Al2O3Nanocomposites (pages 445-452): B. M. Smyser and R. D. SissonChapter 53 Effects of Gas Pressure Sinteking Conditions in Si3N4?Nano SiC Composite on Tribological Behavior (pages 453-460): S. W. Lee and S. H. KimChapter 54 A Novel Process for Synthesizing Nanostructured Carbides: Mechanically Activated Synthesis (pages 461-468): Ruiming Ren, Zhenguo Yang and Leon L. ShawChapter 55 Preparation of Ceramic Powders by a Solution?Polymerization Route Employing PVA Solution (pages 469-476): Sang?Jin Lee and Waltraud M. KrivenChapter 56 Microstructure – Electrical Transport Correlation in Ceramic Oxide Thin Films (pages 477-489): Igor Kosacki and Harlan U. AndersonChapter 57 Mechanical Properties of Nanocrystalline MgAl2O4and its Composites (pages 491-498): S. Bhaduri, S. B. Bhaduri and C. H. HenagerChapter 58 Nano?SiC Dispersed Si3N4 Composite Sintered by Pulsed Electric Current Method (pages 499-506): Yoshiaki Kinemuchi and Kozo IshizakiChapter 59 Syntheses of Alkaline Earth Aluminatelzirconia Composites from Metal?Bearing Precursors (pages 507-514): Kirk A. Rogers, Ramazan Citak, Pragati Kumar and Ken H. SandhageChapter 60 Microwave?Induced Decomposition of Ceramic Oxides to Form Unique Composites (pages 516-523): R. R. Di Fiore and D. E. ClarkChapter 61 Effect of Geometry on CVI with RF Heating (pages 526-534): Vikas Midha and Demetre J. EconomouChapter 62 Novel Applications of Atmospheric Pressure Chemically Vapor Deposited Materials and Methods for Control (pages 535-540): Terence J. ClarkChapter 63 Thermodynamic Modeling of the Ti?Si?C?H?CI?Ar Systemto Determine Optimum Conditions for Chemical Vapor Deposition of Ti3SiC2 (pages 541-552): E. Pickering, W. J. Lackey and S. CrainChapter 64 Net?Shape Manufacture of Low?Cost Ceramic Shapes by Freeze?Gelation (pages 553-558): M. J. Statham, F. Hammett, B. Hanis, R. G. Cooke, R. M. Jordan and A. RocheChapter 65 Al2TiO5 – New Contributions to its Preparation Via the Sol?Gel Technique (pages 559-565): Stefan Tudyka, Karl Pflanz, Norbert Stroh, Fritz Aldinger and Herwig BrunnerChapter 66 Design of Self?Diagnosis In/with Compsite Matertals (pages 567-577): Hiroaki Yanagida

Free Download Advances in Ceramic Matrix Composites XI, Volume 175 By
2006 | 260 Pages | ISBN: 1574982451 | PDF | 14 MB
Contained in this proceeding is a variety of papers that discuss recent advances in ceramic matrix composites. Topics include processing, characterization, geopolymers, evnironmental effects, coatings, and mechanical properties.Content:

Free Download Advances in Ceramic Matrix Composites X, Volume 165 By
2006 | 181 Pages | ISBN: 1574981862 | PDF | 9 MB
Ceramic matrix composites are likely candidates for high-temperature structural applications in industries such as aerospace, utilities, and transportation. This volume includes papers on advances in basic science and technology of ceramic matrix composites and how these advances can be used to address technological issues faced by industry.Content:

Free Download Advances in Ceramic Matrix Composites IX, Volume 153 By
2006 | 340 Pages | ISBN: 1574982079 | PDF | 13 MB
Ceramic-matrix composites are strong, tough, environmentally stable, light in weight, and have the ability to withstand high operating temperatures. These characteristics make them viable candidate materials for high temperature structural applications. Twenty three are included in this volume describing the latest developments in the areas of ceramic fibers, processing and fabrication, oxide and non-oxide composites, carbon-carbon composites, geopolymer composites, mechanical behavior, corrosion and environmental effects, characterization, fiber-matrix interface, design of composites, and thermal/environmental barrier coatings.Content:

Free Download Advanced SiC/SiC Ceramic Composites: Developments and Applications in Energy Systems, Volume 144 By
2006 | 373 Pages | ISBN: 1574981625 | PDF | 15 MB
Ceramic Transactions Volume 144Advanced SiC/SiC Ceramic Composites: Developments and Applications in Energy SystemsEdited by: Akira Kohyama, Mrityunjay Singh, Hua-Tay Lin, and Yutai KatohThis transactions volume contains 33 papers from the CREST International Symposium on SiC/SiC Composite Materials Research and Development and Its Application to Advanced Energy Systems held May 20-22, 2002 in Kyoto, Japan. Chapters include Processing for SiC/SiC Composites; Processing for SiC/SiC Composite Constituent; Characterization of Thermomechanical Performance; and Joining Technologies for Advanced Energy Applications. 373 pages.Content:

Free Download Advances in Polymer Derived Ceramics and Composites By
2010 | 141 Pages | ISBN: 0470878002 | PDF | 7 MB
This book collects some of papers presented at the very successful Symposium "Polymer Derived Ceramics and Composites" in the framework of the 8th Pacific Rim Conference on Ceramic and Glass Technology. There, over 70 researchers from around the world discussed their latest innovations over four full days. It covers all the main aspects of interdisciplinary research and development in the field of Polymer-Derived-Ceramics, from the precursor synthesis and characteristics to the polymer-to-ceramic conversion, from processing and shaping of preceramic polymers into ceramic components to their microstructure at the nano- and micro-scale, from their properties to their most relevant applications in different fields.Content:

Free Download Forming and Machining of Polymers, Ceramics, and Composites
by Matruprasad Rout, Kishore Debnath
English | 2025 | ISBN: 1032527900 | 269 pages | True PDF EPUB | 78.33 MB

Free Download Advances in Unconventional Machining and Composites: Proceedings of AIMTDR 2018 by M. S. Shunmugam
English | EPUB | 2020 | 766 Pages | ISBN : 9813294701 | 267.5 MB
This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.